What is the twilightSwitch controller used for?
The twilightSwitch controller is a twilight sensor for 12–24 V DC LED strips, which smoothly switches the lighting on and off. The controller features a wide-angle light-sensitive element and an advanced algorithm for filtering out extraneous light, which prevents false activations (e.g. from streetlights) and the flickering effect (e.g. caused by passing cars).
How does the lighting switch on?
The lighting switches on automatically with a gradual fade-in (over approx. 2 seconds) when ‘darkness’ is detected (i.e. below approx. 1 lx).
The lighting switches off automatically with a gradual dimming (over approx. 2 seconds) when ‘brightness’ is detected; the controller has built-in hysteresis, which prevents it from ‘flickering’ in the morning.
How do I power the twilightSwitch, and what is the maximum load?
The maximum load is 5A, which corresponds to 60W for a 12V power supply and 120W for a 24V power supply. The device must be powered from the same source as the LED strip.
Is the twilightSwitch suitable for aluminium profiles with a diffuser?
Yes! The twilightSwitch controller can be concealed within LED profiles fitted with a diffuser. The driver has minimal ‘self-light’ output; however, it is recommended to position it away from (i.e. shield it against) excessive exposure to its own light.
Does the reflectiveSwitch have Wi-Fi? Is it possible to read or transmit its status via Wi-Fi?
The reflectiveSwitch controller does not have Wi-Fi. Unfortunately, it is not possible to connect any Wi-Fi module to this controller.